Deer Fence: Monofilament Wire Connector Clip - 10 pk
These wire connection clips are used to terminate a run of monofilament line at the corner or end of our deer fencing systems.
Operation: Thread the end of the monofilament line through one hole of the wire connection clip.
Wrap the monofilament line around the corner or end post.
Thread the end of the monofilament line through the remaining hole of the wire connection clip.
Tighten the tension screws and place a round tightener on the monofilament wire and tighten.
Operation: Thread the end of the monofilament line through one hole of the wire connection clip.
Wrap the monofilament line around the corner or end post.
Thread the end of the monofilament line through the remaining hole of the wire connection clip.
Tighten the tension screws and place a round tightener on the monofilament wire and tighten.
FREE Ground Shipping on Orders $100.00 and Over.
| This Item ships from our Warehouse in Maryland. | |
| Shipping Time Estimation Chart | |
| Shipping Rate Chart | Request a Sample by Clicking Here |
| Read Installation Instructions by Clicking Here | |
List Price: $49.00 Our Price: $39.00 The 8 gauge monofilament wire is used to strengthen our extra strength and millennium deer fence as well as keep the fence from sagging between posts. If you have or are ordering our standard perimeter deer fencing, we recommend using our 12 gauge monofilament wire. We recommend installing a run of monofilament wire at the top and bottom of your deer fencing for best results. The monofilament wire should be crimped using our connection sleeves at each corner or end system. Use our round monofilament tighteners and monofilament tightening tool to achieve your desired tension. The monofilament wire is ultra violet (UV) stabilized to prevent breakdown caused by the sun and weather. The breaking load is approximately 1200 pounds. This is for a roll of 333 feet of 8 gauge monofilament wire. We also offer 666, 1000, and 1666 foot rolls for your convenience. FREE Ground Shipping on Orders $100.00 and Over. |
List Price: $159.00 Our Price: $149.00 Use an end whenever you are going to stop a run of deer fence such as the side of your house or an out building. The deer fence end system consists of (2) 2 1/2 inch diameter end posts, (2) Post Caps, (2) 1 5/8 inch x 9ft brace post, (2) cups with bands and pictured instructions. The heavy duty construction of this system keeps the fence from pulling in on the end post and causing your fence to sag. Includes 2 Complete Ends. FREE Ground Shipping on Orders $100.00 and Over. |
List Price: $7.95 Our Price: $5.95 These monofilament tighteners are used to easily tighten our deer fence monofilament wire for best results installing our deer fencing properly. Each monofilament tightener is ultra-violet (UV) treated for increased longevity. We recommend using two monofilament tighteners between each corner of your fencing project, one each for the top and bottom monofilament wires. You will need our monofilament tightener tool to properly operate these monofilament tighteners. FREE Ground Shipping on Orders $100.00 and Over. |
Virtually Invisible Deer Fencing
Wildlife, Pest & Animal Control
Lawn & Garden
Resource Center
