| Shipping Weight | 1 lb(s). |
| This Item ships from our Warehouse in Maryland. | |
| Shipping Time Estimation Chart | |
| Shipping Rate Chart | Request a Sample by Clicking Here |
| Read Installation Instructions by Clicking Here | |
List Price: $110.95 Our Price: $99.95 Use our Deer Fence Crimping Tool to crimp th 12 or 8 ga. sleeves which are used hold monofilament tension wire around ends and corners. FREE Ground Shipping on Orders $100.00 and Over. |
List Price: $77.00 Our Price: $67.00 The 8 gauge monofilament wire is used to strengthen our extra strength and millennium deer fence as well as keep the fence from sagging between posts. If you have or are ordering our standard perimeter deer fencing, we recommend using our 12 gauge monofilament wire. We recommend installing a run of monofilament wire at the top and bottom of your deer fencing for best results. The monofilament wire should be crimped using our connection sleeves at each corner or end system. Use our round monofilament tighteners and monofilament tightening tool to achieve your desired tension. The monofilament wire is ultra violet (UV) stabilized to prevent breakdown caused by the sun and weather. The breaking load is approximately 1200 pounds. This is for a roll of 666 feet of 8 gauge monofilament wire. We also offer 333, 1000, and 1666 foot rolls for your convenience. FREE Ground Shipping on Orders $100.00 and Over. |
List Price: $25.95 Our Price: $22.00 These 12 inch Kinked Galvanized Aluminum Deer Fence Stakes are used to secure the bottom of our deer fencing to the ground to prevent deer from crawling under the fence. We recommend the stakes be placed approximately every 5 feet along the bottom of your deer fence. These stakes work well for most ground types; however, for rocky soils and unusually hard terrain we recommend and offer 12 or 18 inch rebar stakes. We also offer these stakes in a 250 pack for those of you with larger fencing jobs. FREE Ground Shipping on Orders $100.00 and Over. |