4 horizontal pole
|4 turnbuckles with brace wire|
|4 vertical side pole||4 wire clamps|
|2 center pole||2 9 ft. gate posts, 2 1/2 in.|
|4 vertical center poles||36 self-tapping screws|
|8 end clamps, 1 3/8 in.||2 rebar, 3/8 in. x 6 in.|
|2 latch fork assembly, 1 3/8 in. x 1 3/8 in.||2 2 ft. gate post extension|
|4 male hinge assembly, 2 1/2 in.||2 9 ft. brace post, 1 5/8 in.|
|6 female hinge assembly, 1 3/8 in.||2 brace cup, 1 5/8 in.|
|2 center clamp, 1 3/8 in.||2 brace band, 2 1/2 in.|
|100 self-locking ties||2 post cap, 1 1/2 in.|
|14 bolt, nut, and washer, 5/16 in. x 2 in.||1 drop rod|
|8 corner brackets, 1 3/8 in.||1 drop rod receptacle|
Our 7-foot high dual leaf driveway gates offer you increased access and versatility. Open one side of the gate to access your enclosed area on foot, or open both sides to allow vehicles or heavy equipment to enter. This gate will allow you to protect your home or business from deer activity with limiting parking or the ability to move equipment or materials through the fence with a vehicle. Place your gate anywhere on the fence line for even more convenience. Choose from a variety of widths to best accommodate your vehicles or equipment. This easy-to-install kit includes everything you need to install a gate frame, two leaves, latches, and tensioning systems for an 10-foot wide gate. The kit also includes pictured instructions to guide you during installation.
This kit does not include fencing material. Fencing material must be purchased separately to complete gate installation.