Complete your deer fence installation with this 7 foot high access gate. The 7" access gate for deer fencing includes all of the hardware you need to assemble the gate frame, leaf, latches, and tensioning system, along with pictured instructions to guide you. This complete access gate kit will create a 3-foot wide access gate that may be placed anywhere on your fence line for convenience.
Fencing material is not included in this kit and must be purchased separately to complete the installation.
|2 vertical side pipe, 1 3/8 in.||2 black male hinge, 1 5/8 in.|
|2 horizontal top/bottom pipe, 1 3/8 in.||2 black female hinge, 1 3/8 in.|
|1 center support pipe, 1 3/8 in.||50 self-locking ties, 8 in.|
|4 black corner elbow, 1 3/8 in.||pack of hardware (2 carriage bolt, 16 self-tapping screw)|
|2 black end clamp, 1 3/8 in.||2 monofilament corner tension wire kit, 12 ga.|
|2 black fork assembly gate latch, 1 5/8 in.||2 wire clamp, 1/8 in.|
|2 side poles, 1 5/8 in. x 9 ft.||2 corner elbow, 1 5/8 in.|
|1 top spreader pole, 1 5/8 in.||8 elbow bolt, nut, and washer set|