|2 vertical side pipe, 1 3/8 in.||2 black male hinge, 1 5/8 in.|
|2 horizontal top/bottom pipe, 1 3/8 in.||2 black female hinge, 1 3/8 in.|
|1 center support pipe, 1 3/8 in.||50 self-locking ties, 8 in.|
|4 black corner elbow, 1 3/8 in.||pack of hardware (2 carriage bolt, 16 self-tapping screw)|
|2 black end clamp, 1 3/8 in.||2 monofilament corner tension wire kit, 12 ga.|
|2 black fork assembly gate latch, 1 5/8 in.||2 wire clamp, 1/8 in.|
|2 side poles, 1 5/8 in. x 9 ft.||2 corner elbow, 1 5/8 in.|
|1 top spreader pole, 1 5/8 in.||8 elbow bolt, nut, and washer set|
Complete your deer fence installation with a professional and easy-to-install access gate. This 7-foot high access gate kit includes all of the hardware you need to assemble your gate frame, leaf, latches, and tensioning system, along with pictured instructions to guide you. This kit will create a 6-foot wide access gate that may be placed anywhere on your fence line for convenience.
Fencing material is not included in this kit and must be purchased separately to complete the installation.
Posted by Greg on 15th Oct 2012
The gate kit is complete and made of sturdy material. It is easy to assemble except for the cross bar assembly for the gate's outer frame's poles which require eight 5/16" holes drilled in them. I would suggest to Deer Busters that these holes should be predrilled and that would make the assembly a snap.